Balboa BP100 Bundle With TP200 Keypad


G6402

Price $671.99
(You save $128.00 )
$799.99
Balboa BP100 Bundle With TP200 Keypad
Adding to cart… The item has been added
Don't Leave Without These!
Store Address
Order Online
Pick Up In-Store
195 Exeter Rd, London ON, Canada
Store Shipping
Standard Shipping:
Free Shipping* Usually leaves Warehouse in 1-3 business days

Balboa BP100 Bundle with 4.0KW heater and the 4 button TP200 topside control panel. This compact basic control system is ideal to retrofit in smaller hot tubs with 1 or 2 pumps. Can run on 120 volts for single pump applications.

 

Can run:

  • 1 - 2 speed pump 120V or 240V (Max 12.0 Amps)
  • Ozonator 120V or 240V
  • Dedicated circulation pump (min 23 GPM and 1-1/2" plumbing ) 120V or 240V
    (Pump 1 must be single speed for circ pump option)
  • 2nd single speed pump or blower 120V or 240V
  • 12V light
  • Balboa ControlMySpa wifi compatible (Sold Separately)

 

Whats Included:

  • 1 x G4310 BP100G2 System with 4.0KW heater
  • 1 x TP200 Topside control panel. 4.34" (11.04cm) x 1.58" (4.03cm)
  • 1 x Topside control panel overlay buttons (Temp/Jets/Lights/Aux)
  • 1 x Topside control panel adaptor plate 9" (22.86cm)x 4" (10.16cm)
  • 1 x Light cord, 8'

 

Product Note.
The Balboa BP100G2 is factory configured for 240 volt applications, for 120 volt applications it must be configured.

  • Pump cords are sold separately and not included.

 

Manuals:

Balboa Authorized Online Dealer

 

Warranty Coverage: Balboa VS packs/bundles and BP series packs/bundles come with a twelve (12) months limited manufacturer's warranty from the date of purchase that covers defects in workmanship and materials. This warranty will be void if these parts are damaged due to improper installation or use or if the damage is from exposure to water or electrical power surges. The warranty does not cover any labour charges, the cost of lost water or chemicals, or any other possible damages. Not suitable for salt water applications, voids warranty.


IMPORTANT. Terminal block screws need to be tightened to torque to the specs listed on the inside cover of the pack. Failure to tighten properly can cause heat/resistance arc burn damage to the circuit board. The manufacturer will not honour the limited product warranty if these connection points are burned.

Product Reviews