Waterway Viper Pump Faceplate with 2.5" Suction Inlet
- Waterway part #311-1510
- Made in the USA by Waterway Plastics
- Actual measurement of the intake is approximately 3-5/8" across the outside of the threads.
- Faceplate does not include drain plug, barb fittings, or o-rings.
- Drain plugs with o-rings are sold separately if required.
- Some pumps may have a small hose instead of the drain plug which would require an additional barb fitting
- Faceplate o-ring is sold separately, available here
NOTE: This faceplate only fits Waterway Viper pumps. It is not compatible with Waterway Executive 48, Executive 56, Aqua-flo or any other brands of pumps.