This product has been discontinued. Please contact us for replacement options.
Gecko M-Class replacement spa heater with 5.5KW element, includes the pressure switch, unions on each end on the heater tube. This is a complete heater tube with the threaded mounting studs that will only fit the M-Class spa pack enclosure and ground it correctly as factory designed.
Details:
- 5.5KW, 230 Volts
- DTEC-1 Pressure detection system included
- Wire connectors
- Includes Stainless Steel Housing, Heater Element and Split Nuts.
- For M-Class / MSPA / Gecko spa control pack
- Gecko Part # 9920-100347
- Brand: Genuine Gecko
Hot tub heaters are wear parts and will wear out over time resulting in a loss of heat in the spa or the GFCI breaker tripping. Typical life expectance of a hot tub heater with proper water-care can be about 5 - 8 years. The PH and Alkalinity levels in the hot tub spa water have a direct impact on how long the hot tub heating element will last. Ph levels below 7.2 will rapidly shorten the life of a heating element, pump seal and the back of the spa jets. It's important to keep the Ph between 7.2 and 7.8 with the Alkalinity in the 90 -120 range for maximum longevity of your spa wear parts.
Returns
Final Sale
