ClearWater Stain Remover is a powerful sequestering agent formulated to eliminate unsightly stains caused by metals like manganese, iron, and copper, as well as scale buildup on all types of pool liners. This effective treatment also clears up discolored water caused by these contaminants, restoring clarity and visual appeal to your pool.
Safe for use in all pool types, ClearWater Stain Remover works without affecting water balance and is ideal for routine maintenance or targeted stain correction.
Directions For Use Coloured Water Treatment:
- Adjust pH of pool water to between 6.8 and 7.2 and let chlorine level drop below 2ppm
- Add Stain Remover according to the application method and recommended dosage
- Circulate water continuously for 24 hours
- After 24 hours, adjust pH to between 7.2 and 7.8 and alkalinity to between 80ppm and 120ppm
- Add a regular dose of sanitizer and do not superchlorinate water for at least 24 hours
- Wait 5 minutes before using the pool after the treatment
Dosage:
- Add 125g of Stain Remover per 10,000L of pool water
Directions For Use For Stain Removal:
- Slowly add water to Stain Remover according to the recommended dosage to form a paste
- Turn off the filtration system 30 minutes before applying the past to avoid any water movement
- Apply the paste to pool walls or wherever stains are present
- Wait 30 minutes then brush off stains
- For stubborn stains: Apply product a second time
Dosage:
- For stain removal add water to 150g of Stain Remover to form a paste
