Replacement Wet End for Sundance® Spas and Jacuzzi® - 1.5 HP Hot Tub Pump with the 48 Frame motor. Sundance used this wet end from 1999 through 04/2009.
- 2" suction and discharge (Measures 3" across the outside) threads
- 3" outer thread diameter
- 1.5 HP
- Fits 48 Frame motors only with 3-58" bolt spacing
This wet end has eight legs on the back instead of the older four leg design to attach the 4 bolts to the motor. Only 4 of the legs are used. The Wet end can be turned so the discharge is in the position needed. The wet end is attached to the motor Using the motor's thru-bolts. The thru bolts need to be spaced at 3-5/8" for this wet end, make sure that is the bolt pattern on your motor.
Ensure your pump motor is a 48 frame to fit to this wet end.
The best method to determine the frame size of your motor is to measure the thru bolts (the 4 bolts that run thru the length of the motor and screw onto the wet end or volute of the pump). Measure the distance between the thru bolts. DO NOT measure diagonally but from one bolt to the next bolt.
- 48 Frame distance between bolts is 3-5/8 inch
- 56 Frame distance between bolts is 4-1/8 inch