With the ever-increasing amount of foreign contaminants found in residential water, it's beneficial to filter water before filling your hot tub or spa. Initial chemical balancing becomes easier and future stain and scale issues can be greatly minimized.
Reduces:
| phosphates | chlorine | iron |
| dust | tastes | lead |
| rust | odors | copper |
| grit | cloudiness | iron oxide |
| sediment | colours | V.O.C.'s |
| arsenic | aluminum | mercury |
| cadmium | H2S | vapors |
The best pre-filter design for improving the quality of your water. This filter is important to use if you are filling from a well water source or if your municipal water has high calcium hardness or mineral content. This filter is most effective with a flow rate of 2 gallons per minutes or less.
Easy to use directions!
Step 1. Remove caps and attach filter to any standard garden hose
Step 2. Run water for 30 seconds away from the tub to flush the filter
Step 3. Fill the hot tub
Step 4. Replace caps and store in a cool, dry place
*Replace the filter when it is full and restricts water; up to 10,000 US Gal./38,000 Litres (will vary depending on contaminants in local water)
