The UltraPure™ hot tub ozonator does the oxidation work normally attempted by Chlorine/Bromine. Obnoxious combined Chlorine/Bromine compounds are eliminated. Chlorine/Bromine then only provides a "free available" residual. Typically al problems and wasted chemicals associated with combined Chlorine/Bromine are eliminated.
Details:
- UltraPure EUV model
- Cord with Gecko in.link plug (120 Volts)
- Size is 10" x 4" x 3"
- Weighs about 3 lbs
- Ozone output 50mg/hr
- Bulb life 14,000 hours
- Can be installed in most spas that are ozone ready from the factory
- Replaces any other ozonator already install in a spa with the same electrical plug
- Made in Canada
Whats included:
- 1 x UltraPure EUV series ozonator
- 1 x 60" blue tubing
- 2 x 1/4" check valve
- 2 x mounting screws
Important.
This ozonator is designed for use in a manufacturer engineered and build hot tub that has the manufacturers ULc or ETLc electrical certification tag. Not suitable for home built spas or any other applications.
Good to know.
There is no replacement for Chlorine/Bromine in spa water disinfection. Before any alternative treatment/sanitizer can replace Chlorine/Bromine, it must provide a stable measurable residual; be a biocide that kills viruses, bacteria and algae; and oxidize impurities introduced by bathers. Chlorine/Bromine is the only sanitizer that fulfills these three functions. However, Chlorine/Bromine is not the best oxidizer. Incomplete oxidation accounts for up to 90% of their usage and 100% of their problems. If your hot tub has a factory ozone option then installing an ozonator would provide better oxidation and can make it easier to maintain spa water clarity.
