This is a basic Gecko S Class spa pack that is designed to work in hot tubs that have 1 single 2 speed pump for the jets, it will also operate an ozonator if the hot tub has one and a light. It can be configured to also run an optional circulation pump at 120 volts or 230 volts. This spa pack is recommended as a replacement for a number of older Gecko S Class models that operate 1 pump, possibly a circulation pump, ozone and a light. This Gecko pack does not come with the receptacles for the pump, circ pump or ozonator installed, the receptacles from your old pack can be used or new ones can be purchased separately.
Pack features:
- Spa pack: 0202-205212
can run,
1-2 speed pump 240V,
Circ pump 120V
Ozonator 120V. - Heater 4kw@240V.
- Includes the temperature sensor on a 8' cord as shown in picture
- SC-CF-P12-O-CP-LS-H4.0-U-GE1
- This spa pack requires a neutral wire from the GFCI
- ***Does not come with receptacles, use the ones from your existing pack***
Pack's every output's voltage can be reconfigured.
The wiring instructions are on the inside back of the pack cover, please be sure to check and set the jumper settings for the correct operating set up. Also see the wiring instructions for each component. Specifically the white wire to each one of these components. It is this wire that designates whether each component will operate at 120 volts or 220 volts.
Only ships from Western Canada, not available for in store purchase.
